What you get…

Storage box

  • Two white boxes, one with a purple and black printed design of a camera on one side, the other plain, on a white surface.

    Storage Box Ends

  • Plain brown cardboard box on a white background

    Storage Box

Coral Cot, Heater, Pump, Light and Controllers

  • A clear, rectangular acrylic box with four circular holes on the top surface, sitting on a white background.

    Tank and Lid

  • Medical device wires and components laid out on a white surface.

    Heater, Pump, Light and Controllers

  • A white, L-shaped object with a tall, rectangular stand on one side, possibly a minimalist phone or tablet holder on a plain white surface.

    Tank Stand

  • Black USB charger with a USB-C port on a white background.

    Regional Plug

  • Black plastic microphone mount with adjustable swivel on white background.

    Heater Holder

Accessories

  • A clear flexible tube with a black valve on one end and a white connector on the other, arranged on a white background.

    Quick Prime Syphon

  • A white cylindrical object standing upright on a circular base against a plain white background.

    Adjustable Frag Holder

  • Close-up of a clear glass dropper with a rubber bulb at the top on a white background.

    Dosing Pipette

Unbox the bits

You’ll get the light, pump, and heater connected to the control box in the tank, and the tank inside the stand.

In the accessories box you’ll find the USB plug, adjustable frag stand, the quick prime syphon, pipette to help dosing and feeding, and the suction holder for the heater.

A grid of twelve electronic and tech accessories, including a clear acrylic stand, wired earphones, a white cylindrical object, a black phone holder, a glass pipette, a white sensor wire, a white smartphone mount, a white and purple box, a cardboard box, and a black charger adapter.

Assemble the tank

Attach the light to the stand and the pump and heater to the tank. feed the wires into the back of the stand to hide them

A transparent cube box with electronic components connected to a power source and control unit, placed on a white surface.

Let’s Syphon!

Prime the syphon by opening the valve and then either:

Option 1. Pour salt water into the pipes to fill them up then close the valve, It’s primed!

Person handling medical tubing under a kitchen sink faucet.
A person holding a clear plastic cup connected to a hose and a medical device over a kitchen sink.

Option 2. dunk the tubes into your tank so the tubes fill with salt water then close the valve to trap the water, It’s primed!

Close-up of a hand holding a syringe with a white tube, attached to a white structure, against a plain white background.
Close-up of a person's hand adjusting equipment in a saltwater aquarium with colorful corals and fish, illuminated by an LED light above.

Option 3. Fill the tubes directly from the tap then close the valve. Finally syphon out a tank to get rid of the tap water, It’s primed!. Don’t let the tap water get into any tanks!

Person holding white tube connected to tubing over kitchen sink.
Person washing a white plastic tube under a running faucet in a kitchen sink.

Easy!

Put your new coral in the Coral Cot!

Place the coral into the Coral Cot tank (you can include the water it arrived in, if preferred). Use the siphon to add fresh saltwater.

You can easily adjust the height of the frag holder, or remove the insert entirely to accommodate frag plugs with wider stems. If necessary, you can also add small stones to the bottom of the tank to help weigh down and secure the coral plugs.

A glass of water on a wooden stand connected to a medical inhaler via tubing

Enjoy your new Coral But watch what happens...

Enjoy your new coral! Make sure to dip and treat it as needed. You can use the included pipette to feed the coral, collect water samples for testing, or dose the tank—all without needing to remove the lid.

The siphon can be used for both partial and complete water changes. Important: If you are performing a complete water change, please turn off the pump and heater first to prevent any damage to the equipment.

A lab setup with a transparent syringe pump on a wooden stool, connected by tubing to a glass container with a white straw inside.

Put your clean coral in your tank!

When you’re happy with your coral pop it in your tank!

A person adjusting a brightly lit coral reef aquarium with various colorful corals and fish inside.

Put everything back in the box and store away

Put the light, heater, pump, and all wires and the controller into the tank, then the tank into the stand, and all the accessories into the accessories box. Then put the accessories box, tank, and stand back into the box. Close the box, put the box ends back on.

Open cardboard box with electronic accessories including a power adapter, various cords, and a small white and black device, placed on a white surface.

Store it away until next time!

A bookshelf with books arranged in three rows. The top row has a few books with mostly blue and orange covers. The middle row has children's books with colorful spines, and two white and brown 'Coral Cots' and 'BRIO TOTS' blocks in front of the books. The bottom row features books mainly with red, black, and blue covers.
Boxes labeled 'Coral Cots' on a wooden surface.
Shelf containing multiple rows of books, with a white cardboard box in the middle displaying embossed text.